HIROBO SDX 50 SWM KIT B/M LESS

Σε απόθεμα  (2 διαθέσιμα στοιχεία )
Δεν έχει βαθμολογηθεί ακόμα 

The most competitive .50 ever designed. Take a look our resent Video

  • €298.38
ποσότητα :  
  • Βάρος 
    9 Kgr
  • Κωδικός 
    HIR-0403955

Hirobo’s new SDX .50 features cutting-edge head design that borrows technology from the Turbulence .90, winner of the 2007 Masters and 2008 XFC Championships. More tunable and adjustable than any .50, the SDX can be adjusted to meet a wide range of performance levels… from beginners learning to hover to seasoned 3D or F3C pilots challenging the skies.

Take a look our resent Video

The new FZ-5 Rotor Head delivers the most precise control ever created for a .50 size ship.

  • The rotor head furnishes outstanding control for any maneuver, while a precision machined, aluminum hub and spindle design easily cope with the most demanding 3D flying.
  • An end to interaction… all three control bell cranks rotate on a single pivot as opposed to the conventional two or three. In addition, the new swash plate delivers almost 60% more precise movement than our older aileron and elevator throws… result: there’s no binding, and we’ve virtually eliminated control interaction
  • Two mixing options… unlike ordinary.50s that deliver only 120º eCCPM mixing geometry, the SDX provides both 120º and 135º options for unprecedented precision and rock solid control
  • A whopping 30º collective pitch range delivers the “POP” required for 3D. In addition, cyclic range approaches 9º of deflection for exceptionally quick pitch and roll rates

Features:

  • FZ-5 Rotor head - Maximum 30º pitch stroke possible for 3D
  • Spindle is same size as .90 SSZ-4 (Turbulence D3) head
  • Spindle diameter increased from 6mm to 8mm
  • 2 pcs plastic yoke is same size as SSZ-4 yoke
  • Metal SSZ-4 yoke can be used as optional item
  • New design blade holder with 8mm thrust bearing
  • Aluminum center hub is same size as SSZ-4
  • Blue anodized SSZ-4 center hub can be used as optional item
  • SSZ-4 seesaw, mixing arm, and slide block can be used as optional items
  • Tail housing and tail blade holder straight from the Turbulence
  • Stronger, thicker main frame designed for 120º and 135º SWM
  • New design, lightweight, low height skid
  • New servo mount layouts (as Turbulence) and control layouts
  • Rudder servo can be mounted on front of frame
  • New design aileron lever, elevator lever and lever stays
  • Holes added to main frame for optional header tank
  • Beautiful-, Hirobo “family look” fuselage
  • Κατασκευαστής
    HIROBO LIMITED
κριτικές πελατών 
There are no comments yet. Be the first to leave a comment
Παρακαλούμε συνδεθείτε για να προσθέσετε μια κριτική 

Οι πελάτες που αγόρασαν αυτό το προϊόν αγόρασαν επίσης 

Drop αντικείμενα εδώ για να ψωνίσετε 
Το προϊόν έχει προστεθεί στο καλάθι σας 

Πελάτες που είδαν αυτό το προϊόν αγόρασαν