iMaxrc B6 10A balance charger

-High-power and high-performance circuit

B6 10 Pro has an individual cell voltage balancer inside. So it does not need any balancer

Separately when charging Lithium batteries(Lilo/LiPo/LiFe)for voltage balancing.

 

-Balance individual cells on discharge

B6 10 Pro also can monitor and balance individual cells of the Lithium battery pack

during the discharge process. If the voltage of any one cell varies abnormally, the process

will be stopped with the error message.

 

-Accept various types of Lithium battery

B6 10 Pro can accept three types of Lithium batteries-Lilo, Lipo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer’ Warnings and safety notes’s section.

 

-Lithium battery ‘Fast’ and ‘Storage’ mode

You can charge Lithium battery for special purpose. ’Fast’ charge reduces the charging time of Lithium battery and ‘storage’ mode controls the final voltage of the battery to be suit for long time storage.

 

-Maximum safety

Delta-peak sensitivity

Auto-charge current limit

Capacity limit

Temperature limit(*)

Processing time limit

Input power monitor

Automatic cooling fan

 

-Data store/load

 

-Cyclic charging/discharge

 

-Pc based analysis using USB communication(**)

 

 

 

 

Specifications

Operating voltage rang………………………………………………………………11.0-18.0 Volt

Circuit power……………………………………………………………………………..max.200 watts (charging)

                                                                                                                                             Max.25 watts (discharging)

Charge current range………………………………………………………………….0.1-10.0A

Discharge current range……………………………………………………………..0.1-5.0A

Current drain for balancing Lipo …………………………………………………200mAh/cell

NiCd/NiMH battery cell count …………………………………………………….2 to 24 V

Weight ………………………………………………………………………………………..480 g

Dimensions………………………………………………………………………………….143x119x42mm