30-Amp Pro Switch-Mode BEC Brushless ESC-EFLA1030

Σε απόθεμα  (3 διαθέσιμα στοιχεία )
Δεν έχει βαθμολογηθεί ακόμα 
This is a Spare Replacement Part-30-Amp Pro Switch-Mode BEC Brushless ESC-EFLA1030
  • €32.52
ποσότητα :  
  • Βάρος 
    0.1 Kgr
  • Κωδικός 
    EFLA1030
  • Up to 30-amp continuous current with proper airflow, 35-amp peak
  • 5-volt Switch-Mode BEC circuit capable of 700mAh continuous current on any recommended input voltage
  • Drives up to 5 analog or 4 digital sub-micro servos with the BEC
  • 3S-4S Li-Po or 9- to 12-cell Ni-MH/Ni-Cd input voltage
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cut-off with settings for 3S Li-Po (9.2V), 4S Li-Po (12V) or 74% of battery starting voltage
  • Programmable soft start for helis and airplanes
  • Auto motor shutdown if signal is lost or there is interference
  • Programmable timing - 5 user-selectable ranges for use with a larger variety of brushless motors
  • Heli mode for starting the motor with a low speed ratio
  • Optional RS232 Serial Link available for programming (EFLARS232)
  • Pre-wired connectors - E-flite EC3 connectors on battery input and 3.5mm female gold bullets on motor output leads
Specifications
  • Brake: Yes
  • Continuous Maximum Current: 30A
  • Input Voltage: 3S–4S Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
  • Input Connector Types: 16AWG with E-flite EC3 connector
  • Output Connector Types: 16AWG with 3.5mm Female Gold Bullet Connectors
  • Momentary Peak Current: 35A
  • Length: 2.0 in (51mm)
  • Width: 1.1 in (28mm)
  • Height: 0.35 in (8.7mm)
  • Weight: 1.1 oz (31g)
  • BEC Voltage: 700mA continuous
  • Κατασκευαστής
    E-FLITE
κριτικές πελατών 
There are no comments yet. Be the first to leave a comment
Παρακαλούμε συνδεθείτε για να προσθέσετε μια κριτική 

Οι πελάτες που αγόρασαν αυτό το προϊόν αγόρασαν επίσης 

Drop αντικείμενα εδώ για να ψωνίσετε 
Το προϊόν έχει προστεθεί στο καλάθι σας 

Πελάτες που είδαν αυτό το προϊόν αγόρασαν