This charger charges 2-4S LiPo battery packs with just the press of a button. Everything is automatic, so there’s no complicated guesswork. You get a safe, high-quality charge every time. It’s the easiest charger you’ll ever use!
1.Connect the charger to its power source, using the AC power cord provided.
2.Plug the output power adapter cord into the charger.
3.Plug your battery into the output power adapter cord and plug its balance connector into the matching balance port on the charger, too. If you want to charge 2S or 3S LiPo battery, plug the 2-3S balance board into the charger 4S balance port firstly, then you can plug the 2S or 3S LiPo battery into the balance board.
Depending on the power connector on your battery, you may need to use an adapter or change the connector to match. In addition, if your LiPo battery does not feature an XH balance connector, an adapter board can be used.
1. Automatic detection of battery capacity.
2.Automatically sets charge output.
3.Integrated cell voltage balancer for Lipo batteries.
4.Highly accurate LiPo Balance Charging+/-0.01V
5.High-power, high performance charge circuit.
6.XH-Style LiPo balance ports.
Power Input Voltage: AC 100 to 240V
LiPo Charge Rate: Up to 3.2 Amps (50 Watts Max)
Power Output: 50 Watts
Charge Rate: Up to 1.5C
Battery types:Charge 2-4S LiPo Battery
1.Only use the charger with LiPo type. Do not attempt to charge any other battery types. This charger is not compatible with LiFe, Lilo,NiMh/ NiCd batteries.
2.Observe any cautions and warnings included with your battery.
3.Never leave the charger unsupervised during use. If any malfunction is observed, immediately terminate the process.
4.Keep the charger away from moisture, dust, dirt, heat, direct sunlight and vibration. Do not drop it.
5.The charger is designed to be powered by an 100 to 240V AC power source only.
6.Double-check all connections prior to starting the charge process. Do not connect with reverse polarity.
7.The charger and the battery to be charged should be placed on a heat-resistant, non-flammable and non-conductive surface. Never place them on a car seat, carpet or similar. Keep flammable and volatile materials well away from the operating area.
8.When charging LiPo batteries, we suggest using a LiPo charging safety bag, available from most hobby retailers.
9.Never charge a LiPo battery that is swollen in any way.
10.To avoid short-circuits between the output power adapter cord input connectors, always connect the adapter cord to the charger first and only then to the battery to be charged. Reverse the sequence when disconnecting.
we would like to inform you that our store will remain close from August 8 to August 18.
We wish you the best time during your vacation!
© 2000 - 2020 Myhelis.com :: GreekRotors. All rights reserved.
Powered by X-Cart