GP790 Head Lock Gyro

Δεν υπάρχει απόθεμα 
Δεν έχει βαθμολογηθεί ακόμα 

Brand new intelligent control logic providing dynamic gain adjustment by detecting current flying conditions

  • €53.28
  • Βάρος 
    0.15 Kgr
  • Κωδικός 
    HEG79001T

●Brand new intelligent control logic providing dynamic gain adjustment by detecting current flying conditions, allowing for consistent pirouetting rates during chaos or other demanding 3D maneuvers.
●Utilizes feed forward control logic to boost rudder starting speed, and increase response sensitivity.
●Utilizes Silicon Micro Machines (SMM) sensor with excellent stability to dramatically reduce in-flight tail drifts.
●Utilizes AHTCS (Active Helicopter Tail Control System) to compensate any drift caused by wind direction and force ,as well as unintended yaw induced by helicopter itself during flight maneuvers.
●Tailor made specifically for use with high speed digital rudder servos. This gyro festures high sensitivity and minimal reaction time, fully utilizing the potential of modern high speed digital rudder servos.
●Features 1520μs pulse wide and 760μs narrow pulse wide frame rate.
●Digital/Analog servo switchable.
●Reverse switch.
●Rudder servo travel limit adjustment (ATV).
●Delay adjustment.
●Gyro locking mode and gain can be adjusted remotely from the transmitter.


1.Mini/Micro heli mode, suitable for T-REX250/450(“STATUS” Red); Medium/large heli mode, suitable for T-REX500/600/700(“STATUS" Green)
2.There are 3 kinds of 760μs narrow pulse wide servos on the market, including Futaba S9251, S9256, BLS251.

 

●Operating Voltage:DC 4.5~8.4V
●Current Consumption:<80mA @ 4.8V
●Angular Detection Speed:500 degrees/sec
●Operating Humidity:-20℃~65℃
●RoHS certification.
●Operating Humidity:0%~95%
●Size:26.2x25.2x8.7mm
●Weight:7.5g

  • Κατασκευαστής
    ALIGN
κριτικές πελατών 
There are no comments yet. Be the first to leave a comment
Παρακαλούμε συνδεθείτε για να προσθέσετε μια κριτική 

Οι πελάτες που αγόρασαν αυτό το προϊόν αγόρασαν επίσης 

Drop αντικείμενα εδώ για να ψωνίσετε 
Το προϊόν έχει προστεθεί στο καλάθι σας 
  • Align Trex 500-Main Shaft (OLD NO. H50011T)-H50086T
    Δεν έχει βαθμολογηθεί ακόμα 

    Align Trex 500-Main Shaft (OLD NO. H50011T)-H50086T

    • €6.26
    • 10 % έκπτωση 
  • Align Trex 500-Tail Boom Case-H50044T
    Δεν έχει βαθμολογηθεί ακόμα 

    Align Trex 500-Tail Boom Case-H50044T

    • €6.22
    • 10 % έκπτωση 
  • Align Trex 500-Motor-Mount-H50042T
    Δεν έχει βαθμολογηθεί ακόμα 

    Align Trex 500-Motor-Mount-H50042T

    • €5.00
    • 10 % έκπτωση 
  • Align Trex 500-Canopy Nut-H50056T
    Δεν έχει βαθμολογηθεί ακόμα 

    Align Trex 500-Canopy Nut-H50056T

    • €2.03
    • 10 % έκπτωση 
  • MULTICharger LN-5014
    Δεν έχει βαθμολογηθεί ακόμα 

    MULTICharger LN-5014

    • €31.60
    • 74 % έκπτωση 

Πελάτες που είδαν αυτό το προϊόν αγόρασαν 

  • Align Trex 500-Metal Tail Rotor Holder/Black-H50119T-00
    Δεν έχει βαθμολογηθεί ακόμα 

    Align Trex 500-Metal Tail Rotor Holder/Black-H50119T-00

    • €14.85
    • 10 % έκπτωση 
  • RX ANTENNA
    Δεν έχει βαθμολογηθεί ακόμα 

    RX ANTENNA

    • €1.26
  • MULTICharger LN-5014
    Δεν έχει βαθμολογηθεί ακόμα 

    MULTICharger LN-5014

    • €31.60
    • 74 % έκπτωση 
  • Starter Insert Replacement
    Δεν έχει βαθμολογηθεί ακόμα 

    Starter Insert Replacement

    • €3.22
  • FUEL STOPPER S YELLOW
    Δεν έχει βαθμολογηθεί ακόμα 

    FUEL STOPPER S YELLOW

    • €3.27