Gryphon Mini Auto Booster (Touch switch type) GAB-3300

Δεν υπάρχει απόθεμα 
Δεν έχει βαθμολογηθεί ακόμα 

Mini Auto Booster (Touch switch type)

  • €26.73
  • Βάρος 
    0.15 Kgr
  • Κωδικός 
    GAB-3300

The Tiny Booster GAB-3300 is a light and compact size glow plug ignitor for Nitro Engines, equipped with a built-in push button and timer function for stand alone usage.

It is also able to operate automatically with the use of a "trigger" optional cable linked to a Hall sensor and also with a Y cable linked to the Hall Sensor plug of standard Nitro Engines Governors / FBL built in Governors.

 

TECHNICAL SPECIFICATIONS

 

Input voltage  : 3.2V~16V(1~3 LiPo Cells)

Timer : 12sec Current draw : 0.75A @ 7.4V                      

                                                  0.95A @ 6.0V                     

                                                  1.30A @ 5.2V

Size : 8mm(H) x 17mm(W) x 27mm(L)

Weight : 4g (Main unit)            

               15g (Cable included)

 

OPERATION INSTRUCTIONS

 

- You can feed power to the Tiny Booster with an external battery ( Lipo  2S 450mAh for example )   to avoid using a receiver channel port, or feed  it with an available receiver channel port  

 (Do not use the signal wire in that case).

 

- An automatic fuse circuit will prevent circuit loss and protection of the   receiver battery / power supply in case the glow plug would be defective  or in case of short circuit on the glow plug wire or terminals.

 

- An overheating protection circuit will shut down the Tiny Booster in case  the circuit temperature gets too high (for example with too many repeated  attemps to start a faulty engine / wrong fuel line).

Once the unit has cooled  down, normal operation can be processed.

 

- The 3 different colors leds will indicate the state of the Tiny Booster.   

 

RED LED : Glow Plug Ignition 

YELLOW LED : Timer (12sec) 

BLUE LED : Power on

 

Smart Cable Operation (Sold Separatly)

 

When using the genuine " Smart Cable" from Gryphon, simply plug it to the Hall Sensor of your nitro engine, or to the hall sensor plugof your Nitro Governor / FBL Governor if it has built in governor with a Y cable.

The "Smart Cable" will pick up the Hall Sensor signal and will activate the ignition at a pre determinated rotation speed / starter speed and allow the engine to start. The built in timer will prevent continous ignition of the glow plug after the enging is effectively started.

  • Κατασκευαστής
    Gryphon
κριτικές πελατών 
There are no comments yet. Be the first to leave a comment
Παρακαλούμε συνδεθείτε για να προσθέσετε μια κριτική 

Οι πελάτες που αγόρασαν αυτό το προϊόν αγόρασαν επίσης 

Drop αντικείμενα εδώ για να ψωνίσετε 
Το προϊόν έχει προστεθεί στο καλάθι σας 
  • E-Sky EK1-0575 battery holder
    Δεν έχει βαθμολογηθεί ακόμα 

    E-Sky EK1-0575 battery holder

    • €3.14
    • 10 % έκπτωση 
  • SAB Glass/carbon Main Blades 550mm
    Δεν έχει βαθμολογηθεί ακόμα 

    SAB Glass/carbon Main Blades 550mm

    • €37.40
    • 15 % έκπτωση 
  • SAB Glass/carbon Main Blade 600mm
    Δεν έχει βαθμολογηθεί ακόμα 

    SAB Glass/carbon Main Blade 600mm

    • €42.85
    • 15 % έκπτωση 
  • E-Sky EK1-0574 landing skit
    Δεν έχει βαθμολογηθεί ακόμα 

    E-Sky EK1-0574 landing skit

    • €3.14
    • 10 % έκπτωση 
  • Cool Power 15% Heli
    Δεν έχει βαθμολογηθεί ακόμα 

    Cool Power 15% Heli

    • €17.47
    • 40% πιο λιγο