JR Heli Division

Products: 124 of 27
Drop items here to shop
Product has been added to your cart
  • KS727

    KS727

    New developed tail rotor blades used with high performance gyros especially with the heading lock gyros. Especially with the heading lock gyros. The foil drag holes materials and the designing of the tips of the tail rotor blades are completely new to match with the heading lock gyros as well as high performance gyros.
    Not rated yet
    • €5.04
  • TAIL ROTOR BLADES CT-50EV YELLOW

    TAIL ROTOR BLADES CT-50EV YELLOW

    New developed tail rotor blades used with high performance gyros especially with the heading lock gyros. Especially with the heading lock gyros. The foil drag holes materials and the designing of the tips of the tail rotor blades are completely new to match with the heading lock gyros as well as high performance gyros.
    Not rated yet
    • €5.04
  • FLOATING CAP SET FOR BODY

    FLOATING CAP SET FOR BODY

    Rubber cap with joint ball inside for bolt to go through. The caps are attached to the body so that the bolts can reach to the body from different positions. Absorb vibration and hold the body tightly to the model.
    Not rated yet
    • €13.10
  • Carbon Tailboom Brace Set  50size

    Carbon Tailboom Brace Set 50size

    For 50 size Helis.
    Twin Carbon fibre boom support set with high quality alloy CNC machined end fittings for superior strength and durabaility.
    40% lighter than the original� �thick wall alloy tube units
    Available in anodised� blue, red and silver finishes
    Not rated yet
    • €7.91
  • M3 SCREW FINISHING CAPS
    • 50% less

    M3 SCREW FINISHING CAPS

    The perfect finishing touch, colour coded M3 screw caps. Provide increased load bearing area, ideal for use on Carbon or Glass frames (Supplied in packs of 20)
    Not rated yet
    • €7.52
  • M3 CANOPY SCREW

    M3 CANOPY SCREW

    Functional and an excellent finishing touch, colour coded M3 canopy mounting screws. Lightweight alloy body with hardened M3 steel screw stud. (Supplied in packs of 4)
    Not rated yet
    • €4.75
  • Carbon Flybar Stiffeners 3mm flybars

    Carbon Flybar Stiffeners 3mm flybars

    These carbon fibre flybar stiffening sets simply slide over the flybar and lock in place with alloy collars. Provide important bending resistance and help protect from handling damage. Available in blue, gold, purple, red, silver.
    Not rated yet
    • €6.47
  • Servo Retaining Plates

    Servo Retaining Plates

    These servo retaining plates are designed to fit under the screw heads and over the top of the rubber mounting grommets. By bridging the gap between the mounting rubbers and covering the full surface area it helps to reduce movement of the servo under load whilst retaining vibration absorbtion.
    Supplied in packs of 10
    Not rated yet
    • €5.56
  • Carbon Fibre Tail Fin

    Carbon Fibre Tail Fin

    These carbon fibre tail fins are available in  cut-out 3D styles. CNC machined from highest quality multi laminated carbon composite. Lightweight and strong !
    Not rated yet
    • €10.13
  • Tail Brace / Fin Mount
    • 44% less

    Tail Brace / Fin Mount

    Machined from solid alloy, this tailboom brace and fin mounting clamp offers a secure fitting for our matching carbon tail plane and twin stay boom support kit. Please note that this part is not compatible with the original plastic tail plane or single boom stay.
    Available in Red and Satin Silver Finishes
    Not rated yet
    • €18.36
  • Canopy Mounting Pylon Set

    Canopy Mounting Pylon Set

    High quality 4 piece alloy canopy mounting set to replace the basic hexagonal bar, resistance fit originals. Supplied complete with larger grommets to increase surface area on the glassfibre canopy and all necessary fixing screws. Availble in Satin Silver or Red Finish
    Not rated yet
    • €10.45
  • High Efficiency Cooling Fan

    High Efficiency Cooling Fan

    Machined from high tensile alloy, this cooling fan features aerofoil sectioned angled vanes to provide greater cooling efficiency without sacrificing engine power. A direct replacement for the stock plastic fan. The underside of this fan features a pair of machined pockets suitable for the mounting of 5mm diameter throttle governor magnets as used in the Futaba GV-1, Throttle Jockey and Rev-Lock units Available in Satin Silver
    Not rated yet
    • €26.06
  • 120 CCPM Precision Swashplate
    • 42% less

    120 CCPM Precision Swashplate

    CNC machined precision alloy swashplate suitable for the CCPM control system. Manufactured to the same high standards and specification as our MPM AirSkipper swashplate. Available in Red
    Not rated yet
    • €45.55
  • SUB FUEL TANK (WITH HOLDER)

    SUB FUEL TANK (WITH HOLDER)

    A plastic holder is included for installing the 50cc Sub Fuel Tank (KS397) to the helicopters. The Sub Fuel Tank can eliminate the bubbles from the fuel system and provide visible fuel supply.
    Not rated yet
    • €7.80
  • Carbon Fibre Tail Plane

    Carbon Fibre Tail Plane

    These carbon fibre tail planes are available in cut-out 3D styles and are designed to be used with our alloy boom clamp (Part # JAT12)
    CNC machined from highest quality multi laminated carbon composite. Lightweight and strong !
    Not rated yet
    • €10.13
  • UG WASHOUT BASE
    • 45% less

    UG WASHOUT BASE

    UG WASHOUT BASE. For all JR Helis Except 90 size.  The special surface treatment was given to washout base made from duralumin, and wear-proof nature was raised. For a long period of time, it does not become loose.
    Not rated yet
    • €13.10
  • UG TAIL PULLEY: JR 30 SERIES
    • 42% less

    UG TAIL PULLEY: JR 30 SERIES

    CNC machined aluminum pulleys. High precision and durable. A design that brings down the noise from gears.
    Not rated yet
    • €18.98
  • UG FRONT PULLEY

    UG FRONT PULLEY

    CNC machined aluminum pulleys. High precision and durable. A design that brings down the noise from gears.
    Not rated yet
    • €17.69
  • MAIN ROTOR HEAD 225S TYPE2: JR30-50
    • 48% less

    MAIN ROTOR HEAD 225S TYPE2: JR30-50

    This NEW rotor head is cut from hard aluminum for accuracy and super strength. Due to this design the pilot has more control especially in 3D aerobatic maneovers. This rotor head can be used for all JR 30-50 models.
    Not rated yet
    • €130.44
  • UG ONE-PIECE CONTROL ARM 30-50
    • 44% less

    UG ONE-PIECE CONTROL ARM 30-50

    One-piece control arm CNC machined from hard aluminum. Rigid and exacts the control.
    Not rated yet
    • €10.17
  • UG ELEVATOR ARM (CCMP): 30,50,90

    UG ELEVATOR ARM (CCMP): 30,50,90

    UG elevator arm CNC machined from hard aluminum. Ball bearings are used at the point where the elevator arm touches with the main frame. Offers smooth and precise control to the helicopter.
    Not rated yet
    • €19.66
  • FLYBAR 50 SIZE L=410 (2 PCS)

    FLYBAR 50 SIZE L=410 (2 PCS)

    Made for using with 46-50 size helicopters flying with 600mm long rotor blades. Increase the stability and the performance in fast forward flying.
    Not rated yet
    • €5.90
  • SPLIT TYPE SETTING WEIGHT (FOR 3MM DIA FLYBAR)

    SPLIT TYPE SETTING WEIGHT (FOR 3MM DIA FLYBAR)

    Separate type setting weight which enables an easy installation. Increase stability in hovering.
    Not rated yet
    • €7.58
  • Stabilizer bar stopper 4mm
    • 20% off

    Stabilizer bar stopper 4mm

    Stabilizer bar stopper 4mm
    Not rated yet
    • €5.59
Products: 124 of 27

Bestsellers