- DJI Προσφορές
- DJI
- DJI Ανταλλακτικά
- DJI Αξεσουάρ
- Drones με Γυαλιά FPV
-
Τηλεκατευθυνόμενα
- Για τους νεους στο Χομπι
- Τηλεκατευθυνόμενα Ελικόπτερα
- Τηλεκατευθυνόμενα Αεροπλάνα
- Τηλεκατευθυνόμενα Σκάφη
- Τηλεκατευθυνόμενα Αυτοκίνητα
- Μουλτικόπτερα/Drones
- HD Link
- Τηλεκατευθύνσεις / Παρελκόμενα
- Ηλεκτρονικά εξαρτήματα
- Ηλεκτρικοί Κινητήρες / Ρυθμιστές Στροφών
- Μηχανές / Αξεσουάρ
- Μπαταρίες
- Φορτιστές μπαταριών
- Καύσιμα
- Εργαλεία
- Ανθρακονήματα
- Εξομοιωτής πτήσης
- Ιδέες για Δώρο
- Ξεπούλημα
- DJI Ασφάλεια
- Μεταχειρισμένα
Raptror 30-50
Ταξινόμηση κατά:
συνιστάται
-
KS727
New developed tail rotor blades used with high performance gyros especially with the heading lock gyros. Especially with the heading lock gyros. The foil drag holes materials and the designing of the tips of the tail rotor blades are completely new to match with the heading lock gyros as well as high performance gyros. -
TAIL ROTOR BLADES CT-50EV YELLOW
New developed tail rotor blades used with high performance gyros especially with the heading lock gyros. Especially with the heading lock gyros. The foil drag holes materials and the designing of the tips of the tail rotor blades are completely new to match with the heading lock gyros as well as high performance gyros. -
CARBON FRAME CONVERSION SET TYPE-CCPM: RAPTOR30/50
High rigidity and high durability are acquired and a wonderful flight is made to realize. -
Washout Unit
RAPTOR 30/50 - V1 - V2 & TITAN A complete washout assembly that replaces the stock plastic unit. CNC machined alloy control arms have twin sealed ballraces and high tensile M3 control hardware. Alloy washout base features precision bored brass sleeve for a smooth and long lasting slide action. Supplied complete with replacement drive arms with pins and clips. Available in Red, Blue, Purple & Silver Finishes -
Washout Base
Alloy washout base features precision reamed brass sleeve for a smooth and long lasting slide action. A direct replacement for the standard plastic part supplied complete with control arm mounting screws and shims. Available in Red, Blue, Purple & Silver Finishes -
Aileron Control Levers
These control levers are very substantial and perfect for the high control loads encountered during demanding 3D style flying particularly with 46/50 powered machines swinging 600mm blades. Available in Red, Blue, Purple & Silver Finishes -
Alloy Swashplate
RAPTOR 30/50 - V1 - V2 & TITAN This swashplate features a full size 6804 ZZ precision ballrace (as used in most 60 size helis) complete with pre-tension adjustment screws for zero play. The dynamic load specification of the bearing is significantly greater than the original TT bearing used in the stock swashplate but even if some wear does occur, simply tighten the pre-tension screws to remove any play. Available in Red, Blue, Purple & Silver Finishes -
Solid Mainshaft
RAPTOR 30/50 - V1 & V2 Manufactured from stainless steel and precision ground for an excellent bearing fit. This mainshaft is solid rather than hollow like the original and is particularly well suited to withstand the loads often associated with novice flyers. Supplied one piece per pack. -
V2 - Feathering Spindle
RAPTOR 30/50 - V2 & TITANMachined from 303 grade stainless steel and centreless ground for a precision fit, this feathering spindle is a direct replacement part offering greater strength and an economical priceSupplied one piece per pack -
V1 Canopy Mounting Pylons
RAPTOR 30/50 - V1 onlyA direct replacement for the original hexagonal bar canopy pylons offering improved stiffness via the enlarged mounting flange. Available in red, blue and purple to further customise your machine. -
V2 Canopy Mounting Pylons
RAPTOR 30/50 - V2 & TITANA direct replacement for the original hexagonal bar canopy pylons offering improved stiffness via the enlarged mounting flange. Available in red, blue and purple to further customise your machine. -
Alloy Head Block
RAPTOR 30/50 - V2 & TITAThis version features a revised centre pivot and bearing installation to allow for the larger V2 6mm feathering spindle. NOTE: Picture shows optional flybar carrier and head button fitted - (Not included) Available in Red, Blue -
In-Line Flybar Arm
RAPTOR 30/50 - V1 - V2 & TITAN This in-line flybar operating arm set replaces the original 2 piece plastic arm set-up on the 30 & 50 size model. With end braces machined in alloy and control arms from 303 grade stainless steel, this unit offers a considerable increase in stiffness for a more precise control input. Available in Red, Blue, Purple & Silver Finishes -
Flybar Carrier
RAPTOR 30/50 - V1 - V2 & TITAN Superb CNC machined lightweight alloy flybar carrier. A direct replacement for the original plain alloy unit, this item is approx' 10% lighter and has a superior hard wearing anodised finish. Supplied complete with pre-fitted twin sealed ballraces and provision for fitment of our lightweight head button (Part # RH-05) Available in Red, Blue, Purple & Silver Finishes -
Rotor Head Button
RAPTOR 30/50 - V1 - V2 & TITAN This head button is designed as a direct fit on our own flybar carrier (Part # RH-04) and provides a stylish and practical way to slow your rotor by hand. Low weight is the key design point and this item whilst being 30mm in diameter, weighs just 5 grammes. Available in Red, Blue, Purple & Silver Finishes -
Main Blade Grips
RAPTOR 30/50 V2 & TITANThese grips are suitable for the new V2 Raptors with 6mm feathering spindles and larger radial bearings.Available in Red -
Stainless Steel Flybar
RAPTOR 30/50 - V1 - V2 & TITAN Made from precision ground stainless steel for excellent strength and corrosion resistance. A direct replacement for the standard unit Supplied one piece per pack. -
R30 CARBON BOOM BR SET
RAPTOR 30/50 V1 - V2 & TITAN Twin Carbon fibre boom support set with high quality alloy CNC machined end fittings for superior strength and durabaility. 40% lighter than the original TT thick wall alloy tube units Available in anodised black, purple, blue, red and silver finishes -
Tail Output Shaft + Pulley
RAPTOR 30/50 - V1 - V2 & TITANA direct replacement for the stock plastic pulley and steel shaft. This unit uses a precision ground stainless steel shaft and a true running alloy belt pulley. The shaft can be easily replaced if damaged.Available in Red, Finish -
Tail Brace / Fin Mount
RAPTOR 30/50 - V1 - V2 & TITANMachined from solid alloy, this tailboom brace and fin mounting clamp offers a secure fitting for all types of carbon or glass tail fins. The positive split clamping system provides great rigidity for boom braces compared to the original plastic clamp.Available in Red, Blue, & Silver Finishes -
R30 CARBON FIBRE TAIL PLANE
RAPTOR 30/50 - V1 - V2 & TITAN These carbon fibre tail planes for the RAPTOR 30 are available in cut-out 3D styles. CNC machined from highest quality multi laminated carbon composite. Lightweight and strong -
R30 CARBON FIBRE TAIL FIN
RAPTOR 30/50 - V1 - V2 & TITAN . These carbon fibre tail fins for the RAPTOR 30 are available in cut-out 3D styles. CNC machined from highest quality multi laminated carbon composite. Lightweight and strong! -
Tail Drive Belt Front Guide Pulleys
RAPTOR 30/50 - V1 - V2 & TITANSuperb CNC machined lightweight alloy guide pulleys offering superior smooth running and durability. A direct replacement for the original plastic moulded pulleys.Supplied as a pairAvailable in Red, Blue Finishes -
Carbon Tail Pushrod Kit
RAPTOR 30This carbon tail pushrod kit is a "must" for smooth, positive and accurate tail control. The kit includes a pair of CNC machined alloy servo brackets for mounting to the boom, lightweight carbon rod and a pair of end fittings.Available in Red, Blue,Finishes