Vortex Esprit VX1e flybarless controller

Σε απόθεμα  (9 διαθέσιμα στοιχεία )
Δεν έχει βαθμολογηθεί ακόμα 

Vortex Esprit VX1e flybarless controller

  • €142.27
ποσότητα :  
  • Βάρος 
    0.1 Kgr
  • Κωδικός 
    SRC-VX1E

Vortex Esprit VX1e flybarless controller

 

Designed for 3D Pro pilots and beginner alike the Vortex range of flybarless systems will amaze you with their performance and features. Its simple and intuitive installation make it the ideal choice for pilots who are venturing for the first time into RC helicopters and flybarless systems.
 
Tail - Based on Spartan's market leading gyro technology the Vortex is capable of delivering exceptional tail hold and consistent yaw rates even at eye-blurring speeds of over three full turns per second.
 
Rotor - The cyclic and collective controls are smooth and precise with a very solid feel and impressive response time. Factory calibrated sensors and Spartan's proprietary piro compensation technology enable your helicopter to remain locked in through piro moves.
 
Governor - The built in governor provides Nitro and Electric* modes and support for both magnetic and phase sensors. Cross mixing and look-ahead algorithms ensure that power is delivered in time and not as a result of RPM decay.
 
Receiver - The Vortex is compatible with all radio systems using individual channel connections to the receiver. Additionally it supports single wire connection for most popular protocols and direct connection to 1 or 2 Satellites. Three channels of the radio system can be routed to the Vortex's AUX port to control accessories like lights and glow igniters.
 
Flight Modes - The Vortex offers four flight modes (configuration memories) to accommodate different flying styles. These are often linked to Normal, Idle1, Idle2 & Hold or another switch of the transmitter if preferred.
 
Setup - Using the Spartan DataPod field programmer your new Vortex can be installed and configured in minutes. Adjustments can also be done at the field without the need to carry a computer. For those who prefer the larger computer screens Spartan Studio offers a truly intuitive operation through its guided installation wizard and built in tuning manual.
 
Power - The Vortex operates at both classic 5V and high voltage 8.4V (2S) power systems. The DataPod port of the Vortex also doubles as secondary power connection point when additional current is needed for high torque servos.
 
The easy setup, high vibration immunity, and unparalleled performance are guaranteed to give a hassle free installation and enjoyment of your hobby. Backed up with Spartan's industry-leading up to 3 year warranty and including 50% RRP discounted crash replacements the Vortex offers market leading performance, exceptional value and reassurance.
 
  Vortex Pro VX1 Vortex Nano VX1n Vortex Esprit VX1e
Flight Performance
Sensor Type
PinPoint

PinPoint

MPU-6000
Sensor Technology MEMS-Ring MEMS-Ring MEMS
Sensor Interface Digital Digital Digital
Sensor Specification
Vibration Resistance
Remote Sensor - -
Built-in USB Port - -
USB via DataPod
PC Software
DataPod Required Required Optional
Governor
HV Compatible
Event Logging
Recommended For Jet, Gas, Nitro, Elect. Gas, Nitro, Elect. Nitro, Elect.
Control System Proprietary PID with adaptive tuning
Supported Receivers Standard Pulse, PPM, SBUS, XBUS, UDI, SRXL, SUMD, DSM2, DSMX
Satellites 1 or 2 1 or 2 1 or 2
Radio Channels 6 6 6
Tail Servos Digital 760us, 960us and 1520us centre pulse
Swash Servos Digital or analog 1520us centre pulse
Operating voltage 3.8V to 8.4V (<100mA)
Dimensions
Flight Controller
34 x 23.8 x 11mm
1.34 x 0.94 x 0.43in
36.6 x 23.8 x 14.4mm
1.44 x 0.94 x 0.57in
Dimensions
Remote Sensor
20.6 x 20.6 x 9.6mm
0.81 x 0.81 x 0.36in
N/A N/A
Sensor Lead 16cm 6.3in long N/A N/A
Weight 14 grams 11 grams 11 grams
Warranty Years * 1+2 1+2 1+1
Crash Replacement ** 50% 50% 50%
Box Contents Spartan VX1
Remote Sensor
Welcome Card
Receiver Cables
Adhesive Pads
Canopy Decals
Spartan VX1n
Welcome Card
Receiver Cables
Adhesive Pads
Canopy Decals
Spartan VX1e
Welcome Card
Receiver Cables
Adhesive Pads
Canopy Decals

 

  • Κατασκευαστής
    SPARTAN RC
κριτικές πελατών 
There are no comments yet. Be the first to leave a comment
Παρακαλούμε συνδεθείτε για να προσθέσετε μια κριτική 

Οι πελάτες που αγόρασαν αυτό το προϊόν αγόρασαν επίσης 

Drop αντικείμενα εδώ για να ψωνίσετε 
Το προϊόν έχει προστεθεί στο καλάθι σας 

Πελάτες που είδαν αυτό το προϊόν αγόρασαν