XG11 TRGM DMSS 2.4GHz System with 8 channel receiver and (Throttle Trim :Digital)

In stock (1 item available)
Not rated yet

XG11 TRGM DMSS 2.4GHz System With 8 channel receiver and (Throttle Trim: Digital)

  • €539.89
Qty:  
  • Weight
    2.5 Kgr
  • SKU
    JR-00616

XG11 TRGM DMSS 2.4GHz System With 8 channel receiver and (Throttle Trim: Digital)

XG11 Key Features

  • DMSS Telemetry function
  • Analog trim version has a new line-up
  • XG11 transmitter has become a common for Heli and Acro.
  • Batteries for TX is LiFe(2F 1400 6.4V 1400mAh) and TX is included in charging circuit.
    DC jack is same as XG8.
  • My List
  • Easy setting function(Wizard)
  • Touch select function (You can select the display icon by hopping switch, too.)
  • Advanced digital trim
  • Trainer jack
  • SD card slot
  • Graphic display with backlight function
  • Stick sping adjust
  • Throttle stick angle adjuster(Digital version : Enclosed.  Analog version : Installed)
  • Short stick head for better operation (Red color anodized stick) Option short stick head can be used.
  • Receivers : RG831B/RA01T

 

[System List]

  • MODEL SELECT
  • MODEL COPY/ERASE
  • TYPE SELECT
  • MODEL NAME
  • FLIGHT MODE NAME
  • TRIM SYSTEM
    *[HELI]
    [NORM] is added into Throttle trim in Digital trim version.(same as XG8)
    *[GLID] [FRPN] Direction of Flapperon trim is added.(same as XG8)
  • STICK POSITION SW   * Upgrade is under study
  • TRIM INPUT SW * 4 genealogy(same as XG8)
  • STICK ALERT * (same as XG8)
  • WARNING
  • DEVICE SELECT
    * Trim(momentry, 2pcs & 3 position function) are added in Input divice.
    [HELI] SWASH TYPE
    [ACRO] [GLID] WING TYPE
  • TX SETTINGS
    * 1. Idle alert is added(same as XG8)
    * 2. ON/OFF new function for Model link
  • TRAINER * SW Select is added(Trainer SW/LTRIM/RTRIM)
  • THRO STICK DIRECTION * New function from 11X Zero/DSX11
  • ALL SERVO HOLD
  • STICK MODE * New function from 11X Zero/DSX11
  • BIND & RANGE * (same as XG8)
  • TELEMETRY * (same as XG8)
  • FAIL SAFE

●COMMON

  • D/R & EXP
    * POS is extended to 8 genealogy.
    POS can be changed at stick postion switch.
    (6pcs. of SW SEL is added)
    DELAY can be set up at 8 type at POS change.
  • TRAVEL ADJUST
  • LIMIT ADJUST
  • SUB TRIM
  • REVERSE SW
  • SERVO SPEED
  • PROGRAM MIX1-6
    * 1. P.MIX1-3 is not only normal fix but also curve(same as XG8)
    * 2. Curve can be set up at 5 points in the middle.
    (For DSX11, the curve has just 5 points but XG11 has 7 points, instead.Also, in the middle, the point is only 3 for DSX11 but XG11 has 5 points).
  • TIMER
  • MIX MONITOR
  • SERVO MONITOR

●HELI

  • THROTTLE CURVE * Curve can be set up at 5points in the middle.
  • PITCH CURVE * Curve can be set up at 5points in the middle.
  • TAIL CURVE * Curve can be set up at 5points in the middle.
  • THROTTLE HOLD
  • GYRO SENS
    * 1. New set up function for TAGS01.(In the Gyro icon, DSX11 has only 2 selction, but XG11 has 3selection.
    In the new selection, you can see Triple Axisdisplay icon and you can set up TAG01 adjustment in this icon.)
    * 2. Trim input can be made(same as XG8).
  • GOVERNOR * Trim input can be made(same as XG8)
  • SWASH MIX
    * 1. PIT->AILE->ELEV MIX correction new function(same as XG8)
    * 2. E-Ring gain new fuction(same as XG8)
    * 3. AILE->ELEV, ELEV->AILE trim input new function are added.
  • THROTTLE TRIM
  • MIX to THROTTLE
  • FLIGHT MODE DELAY

 

●ACRO

  • THROTTLE CURVE *Curve can be set up at 5points in the middle.
  • PITCH CURVE *Curve can be set up at 5points in the middle.
  • THROTTLE HOLD
  • GYRO SENS
  • THROTTLE TRIM
    * [ACRO] IDLE ADJ. to be extended to 2 genealogy is studied(New).
  • FLAP SYSTEM * Trim input fuction is reinforced.(same as XG8)
  • SNAP ROLL
    * SNAP ROLL ON/OFF can be selected by not only Snap roll switch but also trim lever.
    Stick ON/OF remains unchanged.
  • DIFFERENTIAL * Trim input function(same as XG8)
  • AILE -> RUDD MIX
  • AILE -> FLAP MIX
  • ELEV -> FLAP MIX
  • RUDD -> AILE/ELEV MIX
    * 1. Trim input fuction(same as XG8)
    * 2. Curve MIX function-up is studied.
  • BALANCE * New function

●GLID

  • DIFFERENTIAL
  • AILE -> RUDD MIX
  • BALANCE
    (This is also new function, like DSX12.  Although DSX12 is just fixed point, XG11 has multi-point.)
  • FLAP RATE
  • MOTO SYSTEM
  • CAMB SYSTEM
  • BRAKE SYSTEM
    * Trim input function is reinforced(same as XG8)
  • FLAPRON MIX
  • ELEV -> CAMB MIX
  • RUDD -> SP01 MIX

=================================================================================

Gyro sensitivity adjustment has been increased to 3 systems to suit 3 axis gyros. This is perfectly matched to the JR 3 Axis Gyro - the TAGS01.

[Screen shot of 3 axis Gyro setting]

[Screen shot of 3 axis Gyro calibration]

[Screen shot of Gyro Trim In setting]

===========================================================================================

 

A more precise Curve can be set with 5 mid-points for the throttle and Pitch control on the aircraft.
Various settings can be achieved depending on the flight condition or the pilot's desired control.

[Screen shot of Throttle Curve]

==============================================================================================

Stick position can be used as a switch for functions such as the timer or Dual rates, as well as the normal function of stick movement. Several switch setting can be arranged with stick travel, along with programmable dead band on each position.

[Screen shot of Balance function]

============================================================================================

In Airplane and Glider mode, Dual Aileron or multiple servo setups can be precisely programmed with the "Balance" function using a Multi point (5 mid point) curve. ※ACRO・GLIDER only.

[Screen shot of Balance function]

==============================================================================================

Not only the Back slide levers or toggle switches, but digital trim switches can be allocated as Input devices. This flexible interface allows comfortable, easy use of the transmitter.

[Screen shot of DEVICE SELECT]

=====================================================================================================

  • JR's newly developed DMSS system maintains high-speed servo response while allowing simultaneous use of telemetry functions.
  • The high-speed telemetry function allows information from the aircraft (that was previously unknown to the user) to be monitored on the transmitter. In addition, alarms with unique sounds alert the user to the situation on the aircraft without even looking at the screen.
  • The telemetry sensor connection employs a bus system that does not require a relay box, allowing sensor extensions and additions to be easily carried out. It is acceptable to merely connect the necessary sensors in parallel.
  • A new-generation long-life Li-Fe battery is used which contributes to a large reduction in transmitter weight. The charging control circuit is built into the transmitter.
  • Using an automatic safety system, the receiver will not operate if the correct model has not been selected in the transmitter before flight.
  • The transmitter has an easy to read backlit LCD display and input keys that are intuitive and easy to use.
  • An E-ring function is incorporated allowing easy limitation of the operation range of the CCPM swash plate servos.
  • A Trim Input function can allocate trim levers to change numerical values of various functions (such as program mix values) during flight.
  • A new function synchronizes the operation of servos on multiple flight control surfaces in real time. This completely eliminates the time lag with fast control inputs are required.
  • A SD card slot is provided which enables saving of aircraft model data and updating of transmitter software to be easily carried out, without connecting the transmitter to a PC.
  • An auto-display function allows digital trim operation to be preferentially displayed on the screen.
  • When inputting numerical values, simultaneously pressing the function key allows the value to be changed at a ten-times faster speed.
  • A servo speed functions is incorporated for all channels, and it allows adjustment to be carried out in each operation direction.
  • The 30-aircraft model memory can be utilized for storing helicopter, airplane, and glider models.
  • A Trainer function is incorporated, which also allows training to be carried out individually for each stick channel.
  • The throttle curve, pitch curve, and curve mixing use a multiple point adjusting method, and you can activate an optional exponential curve function that further smoothes the curves.
  • Six systems of multi-function program mixing are available.
  • A Touch Select function is incorporated, which enables automatic switch selection for programmed functions. This selection is easily carried out.
  • A 'My List' screen is provided that enables display and simple calling up of only functions that the user has selected.
  • Switch arrangement stickers are included for each transmitter model type so users can change the switch arrangement stickers as they please for airplanes and helicopters.
  • The stick units have been mounted at a slight angle so that they can be easily operated in all operating range extremes.
  • Manufacturer
    JR PROPO
Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Related products

Drop items here to shop
Product has been added to your cart

Customers who viewed this product bought